SMART Water Analysis Laboratory
portable lab kit measures 24 water quality parameters for pollution detection, environmental studies, and industrial water and wastes.
The digital SMART3 Colorimeter analyzes test sample color reactions and provides direct readouts for 15 factors.
Two Direct Reading Titrators that provide titration results directly in ppm for six additional factors are also included in the kit.
This digital meter features automatic temperature compensation and measures pH with a range of 0-14, and conductivity in three ranges: 0-19.99 µS/cm, 200-1,999 µS/cm, and 2.00-19.99 mS/cm.
Also includes 15 reagents and five titrator tests.
Reagents Included In Lab Kit Factor Method Range (# Tests)
Ammonia Nesslerization 0-3.0 ppm (50) ; Chlorine DPD 0-4.0 ppm (100); Bromine DPD 0-10 ppm (100); Iodine DPD 0-15 ppm (100); Chromium (Hexavelent); Diphenylcarbazide 0-1.0 ppm (100); Copper Diethyldithiocarbamate 0-5.0 ppm (100); Fluoride SPADNS 0-2.0 ppm (50); Iron Bipyridyl 0-5.0 ppm (50); Nitrate Cadmium Reduction 0-3.0 ppm (20); Nitrite Diazotization/Coupling 0-0.7 ppm (20); Phosphate Ascorbic Acid Reduction 0-3.0 ppm (50); Silica Heteropoly Blue 0-4.0 ppm (50); Sulfate Barium Chloride 0-100 ppm (50); Sulfide Methylene Blue 0-3.0 ppm (50); Turbidity Absorption (No Reagents) 7-400 NTU
Shallow Water Test Kit
Turbidity is measured by direct comparison of sample water to turbidity standards selected to match formazin standards.
Also allows you to accurately test for dissolved oxygen, temperature, pH, and turbidity.
Measures dissolved oxygen from 0 to 10 ppm; readable to 0.1 ppm.
Thermometer measures temperature from -5°C to +45°C in 0.5° increments.
Two octet comparators are used to measure pH from 3.0 to 10.5 in 0.5 increments.
AM-12 TesTab® Water Investigation Kit
Twelve individual test modules allow teams of students to perform tests using safe, simple TesTab® reagents.
Each module provides the necessary materials to test 100 water samples for the following parameters:
alkalinity, ammonia, chloride, chlorine, chromium, copper, dissolved oxygen/BOD, hardness, iron, nitrate, pH, and phosphate.
The reader-friendly, laminated instruction cards provide step-by-step instructions and colorful diagrams.
Also included in each module are a color chart, safety information, and laminated flashcards containing water quality information as it relates to the health of an aquatic ecosystem.
The modules are packaged in a light, field-ready carrying case.
GREEN Program Low Cost Water Monitoring Kit
The eight testing parameters include dissolved oxygen (10 tests), biochemical oxygen demand (10 tests), pH (10 tests), nitrates (10 tests), phosphates (10 tests), temperature change (unlimited), coliform bacteria (3 tests), and turbidity (unlimited).
The Kit comes with all the necessary apparatus and non-hazardous TesTab® reagents required to perform water quality tests on ten water samples.
The GREEN Water Monitoring Kit includes an instructor’s manual with clear, easy-to-read, step-by-step, illustrated instructions.
This portable kit can be easily packed for a day outdoors!
Ideal for students from primary grades through college, as well as citizen monitoring groups.
GREEN Program Water Monitoring Kit
Kit uses the same non-hazardous TesTab® method for testing water quality as the GREEN Advanced Water Monitoring Kit.
Provides enough materials to test 100 water samples for each of nine water quality parameters, including dissolved oxygen, biochemical oxygen demand, pH, temperature change, nitrate, phosphate, turbidity, coliform bacteria, and benthic macroinvertebrates.
Each test factor module includes step-by-step illustrated instruction cards, color charts, water quality flashcards, and safety information.
Instructor’s Manual includes data sheets and guidelines for creating an effective local water quality monitoring program involving both schools and communities.
Ideal for students from primary grades through college, as well as citizen monitoring groups.
GREEN Program Advanced Water Monitoring Kit
Also includes a valuable reference guide which is a standard text for school-based water quality monitoring programs around the world.
Use kit for testing the following parameters: dissolved oxygen (50 tests), precision pH (100 tests), phosphate (50 tests), auxiliary phosphate, nitrate (50 tests), turbidity (50 tests), and temperature (unlimited tests).
WaterMark® Model 6200FD Rod-Suspended Water Current Meter Kit
Measures velocity in shallow streams, irrigation ditches, canals, water supply conduits, and sewers. Suspended on a 1.2 m or 4' wading rod, the bucket wheel revolves in flowing water.
The circuit is closed each revolution or each fifth revolution.
Separate binding posts permit selection of the count desired. Digital Flow Indicator provides direct digital display of flow velocity in feet or meters per second ranging from 0.2 to 32 ft. per second or 0.06 to 7.6 meters per second.
Type AA Current Meter: With meter case, rating table, instrument oil, screw driver, and cleaning cloth.
Spare Parts: Extra pivot with lock nut, hanger screw, tailpiece screw, insulation bushing. Meter Case: Holds meter, spare parts, accessories, and telephone set.
Rating Table. Digital Readout Unit: LCD screen Top Setting Wading Rod: 1.2 m or 4' as required with vernier handle and two-plug connector.
WaterMark® Horizontal PVC Water Bottle with Case
Collect water samples at any depth without exposing them to light during retrieval.
Horizontal bottles are specifically designed for thin-layer stratification and near bottom studies.
Messenger-activated release mechanism closes a single sampler on the end of a line.
Constructed from opaque (gray Schedule 80) PVC, polyethylene, and silicone, this bottle is intended for general physical, chemical, and biological water analysis (excluding trace metals and organics).
Unit includes: 2.2 liter horizontal water bottle, 20.0m nylon cord, line reel, and 250g solid bronze messenger and plastic carrying case.
WaterMark® Horizontal Polycarbonate Water Bottle with Case
Specifically designed for thin-layer stratification and near bottom studies. Collects water samples at any depth.
Messenger-activated release mechanism closes a single sampler on the end of line. Constructed from clear polycarbonate, polyethylene and silicone, this bottle is EPA approved for “ultra-clean” analysis of water, including trace metals and organics.
Unit includes: horizontal water bottle, 20.0m nylon cord, line reel, 250g solid bronze messenger, and plastic carrying case.
WaterMark® Vertical PVC Water Bottle with Case
For free-flushing and “in-series” deployments at any depth without exposing samples to light.
Messenger-activated release mechanism has integral cable clamps allowing samplers to be easily attached to any point on line.
Constructed from opaque PVC, polyethylene, and silicone, this bottle is intended for general physical, chemical, and biological water analysis (excluding trace metals and organics).
Unit includes: 2.2 liter vertical water bottle, 20.0m nylon cord, line reel, 250g solid bronze messenger, and plastic carrying case.
Note: In-series deployments of multiple bottles on a single line require 333g split bronze messengers with lanyards (sold separately).
WaterMark® Vertical Polycarbonate Water Bottle with Case
For free-flushing and “in-series” deployments, this vertical bottle collects water samples at any depth.
Messenger-activated release mechanism has integral cable clamps allowing samplers to be easily attached to any point on line.
Constructed of clear polycarbonate, polyethylene and silicone, this bottle is EPA approved for “ultra-clean” analysis of water, including trace metals and organics.
Unit includes: 2.2 liter vertical bottle, 20.0m nylon cord, line reel, 250g solid bronze messenger, and plastic carrying case.
Note: In-series deployments of multiple bottles on a single line require 333g split bronze messengers with lanyards (sold separately).
Fieldmaster® Basic Water Bottle
Durable PVC body is impact-resistant.
Water can be sampled from any depth as a single-line trigger mechanism uses one line to both raise and lower sampler as well as trigger device to seal collection chamber.
Soft rubber end seals securely hold the 1 liter water sample and a drain hose allows transfer to a storage bottle (not included).
Includes 20m of cord and instructions
LaMotte D.O. Water Sampler
Simplified water sampler features unique, easy-to-remove 2 oz./60 ml collecting bottle designed to work directly with the LaMotte Dissolved Oxygen Test Kit, eliminating sample transfer into a second collecting bottle.
Samples overflow collecting bottle five times to ensure greater representation.
Employing a calibrated line allows you to retrieve samples at controlled depths.
For rapid descent and minimal drift in low currents, attach 2 lb. weight (included) to sampler.
6" Tall sampler contains 2-1/2" diameter cylinder with 3-3/8" x 3-3/8" square top and bottom.
Wildco Student Water Bottle Kit
Clear acrylic one-liter, horizontal-style water sampler with positive messenger-activated closing mechanism.
Includes bottle, 4 oz. tapered nose stainless steel messenger, and 20m uncalibrated nylon line.
Not for use in salt water.
WaterMark® Student Polycarbonate Water Bottle Kit
1.2 Liter, vertical point water sampler is constructed of clear polycarbonate with rubber ball end seals.
Unit includes: water sampler, messenger-activated vertical release mechanism, 200g messenger, nylon carrying case, instructions, 20.0m nylon cord, and reel.
WaterMark® Water Sampler Field Kit
Ideal for water sampling at any depth, zooplankton collections, and secchi disc transparency measurements.
Kit includes: clear polycarbonate 1.0 liter water sampler, 200g messenger, 20 cm limnological secchi disc; armored thermometer (liquid spirit filled, -5°C to +40°C in 0.5° increments); student plankton net (20 cm diameter x 60 cm length x 153 µm); three 20.0m nylon cords, line reels, plastic carrying case, and instructions.
LaMotte Water Sampling and Measurement Kit
Use to collect water samples, bottom samples, and plankton samples and to measure turbidity, temperature, and color.
Kit includes D.O. water sample bottle, bottom sampling dredge, secchi disc, zinc sounding weight and calibrated line, plankton net, Forel Ule color scale, and armored thermometer (-5°C to 50°C in 0.5° graduations).
Packed in a 14" x 7" foam-lined carrying case.
MSR MiniWorks™ Ceramic Water Filter
This lightweight, portable filter effectively removes bacteria and protozoa including Giardia and Cryptosporidia and chemicals such as pesticides, industrial pollutants, iodine, chlorine, and taste and odor compounds from water.
Features include a “stay dry” relief valve that vents untreated water out intake hose, a ceramic element that removes bacteria and protozoa, an adapter base for attaching to a water bottle, a clean-side cover that keeps filter outlet free from contamination, inlet float that keeps intake off stream bottom and extends filter cartridge life, ceramic gauge that measures thickness of the ceramic element for replacement, activated inner carbon core that removes chemicals and odors from the water, opposing action lever for easy pumping, rigid polyurethane housing resistant to chemicals and low temperatures, and a 60-second per liter flow rate.
The ceramic filter can be cleaned for reuse up to 2000 liters depending on water quality.
Water Quality Monitoring Outfit
This outfit stresses the importance of using analytical methods and encourages proper field investigation techniques by use of representative sampling, careful observation, accurate record keeping, and systematic measurement to plot changing conditions.
Outfit contains seven basic water quality test factors including: pH, nitrate-nitrogen, phosphate, dissolved oxygen, alkalinity (total), turbidity, and temperature. Each test module includes the necessary apparatus and reagents to perform 50 tests and also includes complete instructions.
Individual modules allow teams of students to perform water quality analyses at the same time at one or more testing sites.
Outfit housed in a sturdy, rugged field carrying case.
Also included is The Monitor’s Handbook, a 64-page reference guide for water quality analysis in natural aquatic systems, and The Water Quality Educator CD-ROM (for PC or Mac), an interactive CD which offers step-by-step instructions for water
Forestry Suppliers’ Water Monitoring F.I.E.L.D. Kit®
Everything you need to conduct your own water monitoring program!
The kit includes a hydrometer, a high quality student water sampling bottle, a turbidity tube with miniature secchi disc, a leaf pack with flash cards, a pocket case thermometer, student waders, a kit for macro-invertebrate study, and a kit to measure dissolved oxygen, phosphates, nitrates, pH, turbidity, coliform bacteria, and temperature.
Lesson plans correlated with National Science Education Standards are included.
Katadyn® Pocket Water Filter
Reliably removes all pathogenic bacteria and protozoa (e-coli, giardia, cryptosporidium, salmonella, amoebas, etc.) from water.
Water retains its natural mineral content, without the need for boiling.
The round pump handle grip with a shock absorber makes pumping easy and effortless, yielding an approximate output of one quart of filtered water per minute.
The durable ceramic filter has a pore size of 0.2 micron and can be easily cleaned by brushing the surface with an abrasive pad. 10"L x 2" Diameter.
LaMotte Salt Water Test Kit
Provides equipment to monitor nine parameters including ammonia nitrogen, nitrate nitrogen, nitrite nitrogen, pH, alkalinity, carbon dioxide, dissolved oxygen, salinity, and temperature.
Reagents, labware, and accessories are mounted in ethafoam for convenient test selection and portability.
Short form lid instructions are available for quick reference, and a long form booklet provides detailed instructions with kit diagram.
Supplied complete with labware, accessories, sampling bottles, and reagents for 50 tests.
Solinst Model 101 Water Level Meters
These top-of-the line water level meters provide features you’ve been asking for: a 3/8"W polyethylene tape line with black graduations permanently embossed; seven stranded stainless steel conductors in the tape line; light and audible buzzer which sounds when contact is made with water; external sensitivitiy control for varying water conductivity; and a sturdy, stand-alone reel with on/off switch, brake and carry handle (carrying cases are sold separately below).
The Model 101 is available in either English or Metric in two versions, one with a 0.55" O.D.
P2 stainless steel probe and the other with a 0.50" O.D. P6 environmental stainless steel probe.
The P2 probe is designed for momentarily going underwater and is repairable.
The P6 probe is completely submersible for extended periods of time and is rated for pressure up to 1,000' underwater.
The P6 probe is replaceable but not repairable.
AM-12 TesTab® Water Investigation Kit
When the probe reaches water, electronics on the reel emit a steady tone and light signal.
The ultra-slim 5/8" (15 mm) diameter stainless steel and Teflon® probe is designed for use in a wide range of well diameters – down to 3/4" (18 mm).
The encapsulated probe is fully submersible and gives leak-proof performance to the full tape depth.
Tapes are steel encased in polyethylene.
The English models have graduations in feet, 10ths of feet, and 100ths of feet.
The Metric model has graduations in meters, centimeters, and millimeters.
Tape complies with US-GGG-T-106E and European Class 11 Standards.
Meters are constructed of unbreakable, U.V. resistant plastic with stainless steel fittings.
Reel features large handles and soft vinyl grip.
WaterMark® Oil/Water Interface Meter
Detects 1 mm thick floating product on water. Use for monitoring and remediation of groundwater contaminated by oil products.
Accurately measures the thickness of floating product (LNAPL) above the water table.
Also detects and measures sinking layers of DNAPL. Slim, 5/8" stainless steel probe is ideal for wells, piezometers, and direct push equipment as narrow as 3/4" I.D.
The probe and Kynar-jacketed tape with stainless steel conductors withstands hydrocarbons, solvents, and other contaminants. (Tape conforms to N.T.S. standard, US GGG-T-106E and European Class 11 Standard and is accurate to 0.01%.) The reel is constructed of unbreakable, U.V. resistant engineered plastic with stainless steel fittings for years of use in extreme climate conditions.
Reel features large handles for easy use with gloved hands, soft vinyl grip on reel, and unique hook on frame to allow meter to hang on the casing. Electronics are fully encapsulated to protect
Coliscan Water Monitoring Kits
Coliscan Water Monitoring Kit Ideal for sample sizes of 1 to 5 ml, this method uses Coliscan Easygel to test river water or other samples which have a sizable population of coliforms and/or E. coli.
Just add the water sample (up to 5 ml) directly to the bottle of Coliscan Easygel, swirl, pour into a pre-treated Easygel petri dish, and incubate to obtain results.
Kit includes 10 Coliscan Easygel bottles, 10 pre-treated Easygel petri dishes, 10 1 ml droppers, 10 sterile 30 ml collection bottles, and instructions.
Performs 10 tests.
PurTest™ Water Tests
PurTest™ Bacteria, Nitrate, and Nitrite Water Test Check the safety of drinking water easily with this test based on the EPA test method for detecting coliform bacteria, nitrate, and nitrite.
Ideal for health departments, utilities, and inspectors, the non-toxic bacteria test is reliable and accurate in detecting the presence of dangerous coliform bacteria. There is no need for additional laboratory equipment.
Simply add water directly to the bottle of pre-measured test solution, let stand at room temperature, and after 48 hours, check the water color in the test bottle.
A purple color means no unsafe bacteria is detected, a yellow color indicates unsafe bacteria is present, brown indicates a high bacteria level, whether safe or unsafe. One bacteria test per package.
To test for Nitrate and Nitrite, fill a glass with water, insert test strip making sure each pad is wet, wait 60 seconds for reaction, then compare colors to test packet immediately. (Colors are
Deep Water Bottom Dredge
Use this 6" x 6" dredge in all types of bottom substrates, except hard packed clays.
Two-way mechanism prevents accidental closure while in transit, yet triggers dredge with a spring-loaded release mechanism upon impact with the bottom, eliminating the need for a messenger.
Top is covered with stainless steel screening to reduce frontal shock wave and prevent escape of sample upon retrieval.
Effective sampling area is 36 square inches.
Jaws, side plates, underlip plate, screen frame, and hinge pin all made of #316 stainless steel.
Top screen and fasteners are made from 18-8 stainless steel.
Exterior weights and closing arms are constructed of powder painted mild steel.
A 3/8" nylon rope is recommended for raising and lowering dredge.
Wildco® Alpha Horizontal and Vertical Water Bottles
Collect water samples at any depth! Features flexible polyurethane end seals, transparent acrylic cylinder and amber latex closure tubing for resistance to sunlight. 2.2 Liter capacity.
Available in horizontal style for stratification and near bottom studies or vertical style for series sampling.
Requires line and messenger (sold separately).
Wildco® Beta Plus Horizontal Water Bottle
Similar to the Alpha Water Bottles, but with rigid, white polyurethane end seals, opaque PVC cylinder and amber latex tubing for cleanliness.
Well suited for sampling trace metals and trace organics. 2.2 Liter capacity.
Horizontal style for stratification and near bottom studies.
Requires line and messenger (sold separately).
Outback Portable Water Filtration Bottle
Just fill up the bottle out of any US lake or stream and it filters as you drink!
The filter traps all protozoan parasites in a torturous path polymer matrix that has been impregnated with activated carbon dust and other proprietary compounds.
The result is a simply designed filter that slips neatly into the neck of the provided Nalgene® All Terrain Bottle.
Exceeds all EPA guidelines for removal of Giardia, Lamblia, and Cryptosporidium, and in addition, removes sediment, chlorine, lead, taste and odor.
One filter is good for approximately 200 refills.
Water Filtration Bottle, 22 oz. capacity
Katadyn® Drip-Style Water Filtration System
Operates on gravity. Water works its way through the three-filter system, yielding 1 quart per hour.
This unique system consists of two plastic containers and three filters (ceradyn filter mechanism).
The top container is filled with unfiltered water.
The bottom container collects the filtered water, which is dispensed through a plastic faucet.
Mineral and salt contents of the water are not changed, water hardness is not changed, and sea water is not desalinated.
Removes bacteria and protozoan cysts – including disease-causing micro-organisms – coliforms and E.coli, typhoid, dysentery, cholera, colibacillosis, amebiasis, bilharciosis, and giardiasis.
Makes 39,000 gallons depending on water quality.
Complete with three filters. 26"H x 11"D.
Wedco-Pac Five-Gallon Water Container
Made of high density, unbreakable polyethylene.
Sanitary, odorless, and non-toxic.
Tap has large opening for easy pouring.
Leak-proof vent cap.
Rigid rectangular shape for easy shelf storage.
Dimensions: 16"L x 8.5"W x 11"H.
Collapsible Water Container
Five-gallon capacity. Features carry bail and plastic closure. Polyethylene plastic. Folds flat.
Flexogen® Water Hoses
5/8" Hose has patented 8-layer construction for long life.
Glossy smooth cover resists abrasion.
Extremely lightweight and flexible.
Resists kinking and twisting in all types of weather.
Burst strength of 500 psi.
Green hose with heavy-gauge brass couplings and FlowGuard collar to prevent kinks near faucet.
Lifetime warranty from the manufacturer.
Flexogen Water Hose – 5/8" x 75'
WaterMark® Small Water Level Meters
Compact and lightweight, this meter fits easily inside a backpack and is perfect for use in remote sites where portability is a primary concern.
Features a narrow 5/8˝ (16 mm) diameter stainless steel and Teflon® probe which is ideal for use in piezometers and stilling pipes.
The easy-to-read (ASME Standard) heavy duty polyethylene jacketed tape features stainless steel conductors, and the fully-encapsulated, modular microprocessor control panel features a battery drawer, audible signal, and light.
Operates on one 9V battery.
Dust cover carrying case included.
75' Small Water Level Meter; Graduations: ft., 10ths, 100ths
Solinst® Model 101 P7 Water Level Meters with Laser Marked Tape
For accurately measuring the depth to water in wells, boreholes, standpipes, and tanks.
Easy-to-use, the Model 101 P7 features a pressure-proof probe rated to 500 psi and permanently laser marked PVDF flat tape that is traceable to NIST and EU measurement standards. Reads accurately to 1/100 ft. or each millimeter.
The corrosion-proof stainless steel probe is submersible up to 1000 ft. (300 m), making it ideal for measuring total well depth.
The sensor at the tip of the probe provides consistent measurements with almost zero displacement.
The tape seal plug design allows the probe to be quickly and easily replaced.
Each tape conductor on the 3/8" wide PVDF flat tape contains 13 strands of stainless steel and 6 strands of copper-coated steel, making the tape non-stretch and high in tensile strength and electrical efficiency.
The thick dog bone design of the tape prevents adherence to
LaMotte Water Pollution Detection Kit
Dissolved oxygen – direct reading titration procedure, uses a modified Winkler method, range 0.2 to 10.0 ppm (0.2 ppm interval), five reagents, makes 50 tests. Nitrate – quartet comparator method, uses the modified A.P.H.A. reagent system, range 0.2 ppm to 1.0 ppm (0.2 ppm, 0.4 ppm, 0.6 ppm, 1.0 ppm), four reagents, makes 50 tests. Phosphate – quartet comparator method, uses the absorbic acid method to produce a series of blue colors. Range 0.2 ppm to 1.0 ppm (values 0.2, 0.4, 0.6, 1.0 ppm), four reagents, makes 50 tests. pH – wide range indicator, octet comparator with bi-color reader, values, 3.0, 4.0, 5.0, 6.0, 7.0, 8.0, 9.0, 10.0, makes 100 tests. Carbon dioxide – direct reading titration procedure, results given as free carbon dioxide, range 0 to 50 ppm, two reagents, makes 50 tests. Chlorides – direct reading titration method, uses potassium chromate-silver nitrate reaction, range 0 to 200 ppm, includes salinity test procedure, two reagents, makes 50 tests. Ammonia – octet comparator procedure for ammonia nitrogen by the Nessler
CHEMets® Water Test Kits
Designed for low-to-medium-range colorimetric analysis, each kit includes 30 prescored ampoules filled with reagents sealed under vacuum, color comparators, a snap cup, and instructions to perform 30 tests.
Dissolved Oxygen Test Kit, 30 Tests
LaMotte Limnology Water Test Set
Tests for dissolved oxygen, combination nitrate-phosphate, wide range pH, silica, calcium-magnesium, total hardness, carbon dioxide.
Includes 40 Nitrate tests and 50 of the others.
Various components for the chemical tests are housed in six individual cases which can be distributed to teams of students on field trips.
Sampling bottles and analysis report forms are included.
All items are mounted in a rugged, waterproof carrying case.
Solinst® Model 102 and Mini 102 Water Level Meters
Designed to measure groundwater levels, especially in small diameter tubes and piezometers or where a flexible cable is needed to snake past an in-well pump.
The cable has a heavy-duty jacket and stainless steel coaxial conductors for strength.
Permanent markings are precisely laser etched on the cable every 1/100 ft. or each millimeter.
When the probe enters water the electrical circuit is completed, sending a signal back to the reel where a light and clearly audible buzzer are activated.
The water level is then determined by taking a reading directly from the cable at the top of the well casing or borehole.
A sensitivity control allows the buzzer to be turned off while in cascading water, and ensures a clear signal in both high and low conductivity conditions.
The P1 Probe is stainless steel with 12 weights and measures 1/4˝ dia. x 1.5˝ long.
MasterFlex™ E/S Portable Sampler
This variable-speed pump runs up to 4 hours on the self-contained 12 VDC rechargeable battery, or indefinitely from any AC outlet or 12 VDC power supply (automotive, etc.). The pump lifts water from a depth of 26 feet when used with pump head and sizes 15 and 24 tubing.
Flow rate is 125 to 650 ml/minute for #15 tubing; 210 to 1,100 ml/minute for #24 tubing. Order pump head and tubing separately.
The IP54-rated control panel protects against inclement weather and water splash.
Pump is encased in a high visibility yellow aluminum housing and includes an instruction manual and AC adapter with 12' cable.
Motor Type: Variable with speed controlled by a single-turn potentiometer.
Speed Range: 1 to 400 rpm.
Number of Standard Heads Accepted: one.
LaMotte® SMART3 Colorimeter
This microprocessor-based, compact colorimeter automatically selects proper wavelengths for performing a variety of water tests.
A menu-driven display guides you step-by-step through testing procedures and then displays the results.
The multi-LED optical system is embedded in the colorimeter’s light chamber and is optimized for use with LaMotte test reagents.
Just select the test and then insert the sample with reagent.
You can even enter up to 25 tests for analysis of custom reagent systems.
Features include a USB port to interface with your PC, a six-button mechanical switch keypad, a self-diagnostics system, a power-saving automatic shut-off function, and factory-set calibration. Six sample tubes, USB cable, USB wall plug, and instruction manual included.
Waterproof to IP67. Range: 0 to 125% T. Resolution: 1% FS.
LaMotte® SMART3 Colorimeter
A valuable tool in regulatory monitoring, process water testing, and environmental water analysis in the field or laboratory.
Also called a nephelometer, it measures the amount of light scattered at right angles from a beam of light passing through the test sample.
Uses a tungsten filament lamp as a light source.
Accepted by the EPA for compliance with NPDWR and NPDES monitoring programs as specified by USEPA method 180.1.
Supplied with four optically selected sample vials with screw caps, standardization package consisting of 0.0, 1.0, and 10.0 NTU standards, instruction manual, Lithium ion rechargeable battery, wall charger, and carrying case.
Range: 0 to 4,000 Nephelometric Turbidity Units (NTUs). Accuracy: ±2%. Response time: 5 seconds. Serial interface: RS232. Power: Lithium ion rechargeable battery and wall charger. Dimensions: 3-3/8˝ x 6-3/8˝ x 2-5/8˝.
LaMotte 1200 Digital Chlorine Analyzer Kit
In order to effectively kill, control, and remove impurities in water using chlorine, it is essential to establish and maintain sufficient levels of Free Available Chlorine (a.k.a. hypochlorous acid), the active ingredient responsible for chlorine’s sanitizing capabilities. LaMotte’s 1200 Series direct reading, single test colorimeter and DPD reagents allow you to do just that. With only a single test sample of chlorinated water, you’ll be able to use the colorimeter and DPD reagents to distinguish the water’s level of Free Available Chlorine as well as its total residual of chlorine. The sample’s level of Bromine and Iodine can also be determined with a few simple calculations. Results quickly appear in ppm (parts per million) on the colorimeter’s large 3-1/2 digit LCD screen, and its flip-top lid over the sample chamber prevents any stray light, especially in the field and avoids misplacing separate light caps. Features include a compact, hand-held design, a water-resistant, rugged housing for use in the field or lab, and an RS232 serial port for interfacing with a
Environmental Test Kits
Innovations in comparator methods permit the detection of extremely low levels of many water factors that previously could not be detected colorimetrically. Each outfit includes the necessary test reagents, glassware, accessories and full instructions for conducting the chemical analysis covered by the kit. Refill reagents and replacement parts are available for all units – call for details. Each set is furnished in a carrying case.
Alkalinity (WAT-DR), Meets GLOBE Specifications Direct reading titration method for total alkalinity in terms of CaCO3, readings in ppm range 0-200 ppm in 4 ppm increments, two reagents. Makes 50 tests.
Test Kit, Alkalinity (WAT-DR), Meets GLOBE Specifications
Aquaculture Test Kit
Ideal for fresh water analysis. Allows you to make nine critical test factors efficiently and accurately in the field.
Unit is supplied complete with labware, accessories, sampling bottle, and reagents for 50 tests of each factor.
Octa-Slide Comparator Tests Range Ammonia Nitrogen 0.2, 0.4, 0.6, 0.8, 1.0, 1.5, 2.0, 3.0 ppm Nitrite Nitrogen 0.05, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.8 ppm pH 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5 Direct Reading Titrator Range/Sensitivity Alkalinity 0 to 200 ppm/4.0 ppm Carbon Dioxide 0 to 50 ppm/1.0 ppm Chloride 0 to 200 ppm/4.0 ppm Dissolved Oxygen 0 to 10 ppm/0.2 ppm Hardness Total as CaCO3 0 to 200 ppm/4.0 ppm Temperature Armored Thermometer -5°C to +45°C/0.5°C
Solinst® Levelogger® Edge
Maximum number of readings: 40,000 readings with FRAM memory or up to 120,000 using linear data compression.
Sample interval: 0.125 seconds to 99 hours.
Sampling modes: linear, event-based, or customizable recording schedule.
Minimum system requirements: Processor, Pentium 166Mhz; Memory, 32MB or more; Display, VGA 800 x 600 pixels 256 color; RS232 COM port; Windows 95, 98, ME, 2000, or XP. Stainless steel level sensor — Accuracy: ±0.05% FS.
Resolution: 24 Bit Resolution.
Temperature sensor — Range: -20°C to 80°C.
Power source: lithium battery (included).
Battery life: 10 years.
15' Levelogger Edge / 30' Levelogger Edge /100' Levelogger Edge
Solinst Model 122 Interface Meters
Simple to operate, easily cleaned, and lightweight, it automatically tests the circuitry each time it is turned on. The 5/8" diameter probe allows easy access through tight spaces and into narrow wells. To detect liquids, this meter uses a probe with an infrared beam and receptor contained within a cone-shaped tip. When the probe enters liquid, the beam is refracted from the detector, activating a steady tone and light when the liquid is non-aqueous product. If the liquid is water, the conductivity of water completes a conductivity circuit which overrides the infrared circuit, activating an intermittent tone and light. Both optical and electronic sensors are precisely at the zero point, giving an accuracy of 1/200 ft. from the pre-marked tape. Polyethylene tape line is permanently embossed with feet in red and 100ths in black. Two stranded stainless steel conductors are embedded in the flat-tape cable, preventing cable stretch and providing strength. Easy-to-splice tape is attached to probe. Tape guide/datum provides repeatably
WaterMark® Stream Gauges
Finished with a special porcelain enamel to ensure easy reading and resist rust or discoloration. Can even be used in salt water! Each gauge or gauge section is accurately graduated. Provided with grommeted holes for fastening with No. 8 round head screws. Available in four standard styles.
Style “E” Graduated in feet and tenths, unnumbered. 3-1/2" Wide. Available in 1', 2' and 5' sections. Separate number plates (sold separately) are fastened on a plank or pier wall to number any elevations desired.
WaterMark® Model 4200 Bridge Board
Use this free-standing support with a sounding reel (sold separately) to raise or lower a current meter or sediment sampler over bridge railings. The vertical leg is adjustable to match rails of 12˝ to 48˝ heights. The 4' boom extends past the bridge railing to lower the instrument into the water below. Recommended maximum weight of the instrument being lowered is 30 pounds. The bridge board is constructed of aluminum with stainless steel hardware. Folds for easy transportation and storage. Dimensions (collapsed): 48˝ x 12˝ x 6˝.
WaterMark® USGS Type Current Meters
Model 6200 “AA” Current Meter Measures velocity from 0.1 FPS to 25 FPS. May be suspended by wading rod (sold separately) or cable from a bridge board (sold separately). Furnished with a foam-cushioned carrying case, rating chart, tail fin assembly, screw driver, assorted spare parts, special lubricant, and operation and maintenance manual. Dimensions: 8-3/4˝ x 5˝.
6" x 6" x 6" Dredge for sampling benthic communities inhabiting soft bottomed aquatic environments.
Hinged upper doors swing open as dredge is lowered, allowing water to pass through and minimize shock wave.
Stainless steel messenger closes dredge, preventing washout of sample.
Cable release system, with bar grip, helps set dredge with greater safety.
Dredge is constructed of stainless steel with special Heliarc welding for added strength and durability.
A case, 100 feet of line, and messenger are included.
Also available is a 5' aluminum handle with trip head that can be used in place of the line for shallow water work.
Easily installed on Ekman dredge.
WaterMark® Surber Type Stream Bottom Sampler
Used for “semi-quantitative” analysis of benthic stream organisms. Can be used in silt or large cobble. Substrates contained within the 12" x 12" folding brass frame are agitated to dislodge insects while water flow transports animals into plankton net. Heavy-duty Nitex® mesh net is supported by perpendicular frame members and has built-in, clear polycarbonate cod-end assembly with latex tubing and pinch clamp. Nylon carrying bag also included. 500 µ Mesh Net
Katadyn® Mini Filter
This handy water filtration system only weighs 8 oz. and treats up to one pint per minute! The ceramic Katadyn® filter uses no chemicals to remove protozoa, cysts, fungi, parasites, spores, and giardia, as well as agents of typhoid, dysentery, cholera, amebiasis, and many other diseases to give you the safest drinking water possible. Made for longevity, the ceramic filter can be cleaned with the special regeneration brush (included) about 100 times and yields up to 2,000 gallons of fresh potable water before it needs replacing (replacement filters available below). Features Katadyn’s exclusive silver ion principle which prevents deposited bacteria from growing into the interior of the filter. The filter is constructed of durable Delrin® plastic and is small enough to fit into any backpack or glovebox. It features a 30" suction hose, manual, and a filter testing gauge. Nylon carrying case with locking drawstring included. Turquoise with blue fittings. 7"H x 2-3/4"W x 1-3/4"D.
ClineFinder™ Digital Thermometer
The ClineFinder™ measures water temperature at any depth from the surface to 50 feet (15.25 meters), with updates every 2.5 seconds. A compact cable reel allows easy extension and retraction of the probe, and depth is marked on the cable every 2 feet (.5 meters) with mil-spec markers. Completely surrounded by water, the low-mass sensor provides exceptionally fast temperature readings. One-year manufacturer’s warranty. Operating range: 30°F to 115°F (-1°C to 46°C). Accuracy: ±0.5° over operating range. Resolution: 0.1°. Power: 3 AA alkaline batteries (included).
WaterMark® Universal Core Head Kit Sediment Sampler
Universal core head kit contains polyethylene and stainless steel corer head, “T” handle, one clear polycarbonate core barrel (68 mm x 71 mm x 120 cm), two polycarbonate end caps, one core extruding plug, 15 m calibrated line with line reel, hexnut driver, carrying case, and directions.
60 cm Polycarbonate Core Barrels with Poly End Caps
120 cm Polycarbonate Core Barrels with Poly End Caps
Bronze Slide Hammer Assembly
Bronze Gravity Weight
Core Extruding Rod with Extruding Plug
Incremental Core Extruding Apparatus
Core Extruding Plug
1.2 m Aluminum Holobar Extension Rods
2.4 m Aluminum Holobar Extension Rods
The end of this sampler swings for collecting samples at different angles with a maximum of 90°, making it perfect for sampling streams from steep stream banks. The fiberglass pole extends to 12 feet for flexibility in various situations. A 960 ml bottle is included. A large snapper holds bottles in the 1,000 ml range. The Swing Sampler may be used for liquids, powders, or small solids.
500ml Stainless Steel Bomb Sampler
Use to collect liquid samples from the top, bottom, or any intermediate level of storage tanks, tank cars, ponds, lagoons, and wells. A suspension cable (sold separately) may be used to lower the sampler to the desired depth. A second cable attached to the plunger assembly is pulled, allowing the reservoir chamber to fill. Releasing the cable allows the plunger to seal, holding the sample inside. Helps comply with EPA Composite Sampling Methods. Sampler is 2-1/2" dia. x 10"L and holds 500ml.
WaterMark® Stream Drift Net
Collects aquatic insects moving in running waters. Nitex® net is supported open and staked to sediments with 11" x 18.5" stainless steel frame. Sample is concentrated in a two-piece, PVC collecting bucket, lined with Nitex® nylon mesh. Net is 40" long.
500 µ Mesh Net
WaterMark® Sieve Bucket
Quickly and easily collect large biological or geological samples and wash them as well with this three-gallon (12-liter) sieve bucket. Constructed of heavy-duty plastic with a molded pouring spout and a heavy chromed handle. Bottom is stainless wire cloth (#30 mesh) reinforced with hardware cloth. A sturdy stainless ring helps maintain circular shape. 12˝ dia. x 8˝ deep. Graduated in pints, quarts, gallons, and liters.
WaterMark® Student Plankton Net
This 15 cm diameter x 50 cm length Nitex® plankton net comes with a stainless steel ring and bridle, clear polycarbonate cod-end assembly with valve action drain, and 10.0m line. Nitex® nylon nets are available in 153 µ, 80 µ, and 363 µ mesh sizes.
153 µ Mesh Net
80 µ Mesh Net
363 µ Mesh Net
WaterMark® Simple Plankton Nets
Each net comes complete with heavy-duty Nitex® nylon net, a stainless steel ring and bridle, and PVC cod end assembly. The high efficiency cod end (7.5 cm dia.) is a two-piece design with stainless steel fasteners.
WaterMark® Bottom Aquatic Kick Net
Net includes: 10" x 18" stainless steel rectangular frame; detachable, 60" aluminum handle with stainless steel threaded attachment; and 10" deep reinforced 500 µm Nitex® nylon net. EPA approved for Rapid Bioassay Assessment Programs.
WaterMark® Oceanographic Weighted Secchi Disc
Constructed of white high density polyethylene, this 51 cm diameter disc comes with stainless steel hardware, built-in 5 lb. lead sounding weight, 20.0m nylon cord, and reel.
WaterMark® Limnological Secchi Disc with Detachable Sounding Weight
This 20 cm dia. polycarbonate disc with a detachable 24 oz. zinc sounding weight features silk screened black and white quadrants. Includes stainless steel hardware, reel, and 20.0m nylon cord.
WaterMark® Limnological Weighted Secchi Disc
This 20 cm diameter secchi disc is made of Sintra® PVC. Unit includes: stainless steel hardware and built-in 24 oz. zinc sounding weight.
I-CHEM™ Storm Water Sampler
The I-CHEM collects a full one-liter sample of first flush storm water within the first 30 minutes of a rain event in compliance with EPA sampling requirements. A floating ball valve seals off the sample collection port to prevent co-mingling with run-off water as well as volatile analyte loss. Water flows through the sampler's collection funnel directly into a Nalgene® sample bottle so that no sample transfer is necessary before transport to the lab. After sampling is complete, remove the collection bottle from the reusable storm water sampler mounting kit's tube (sold separately). Simply discard the bottle's collection funnel and replace with a standard Nalgene closure for leakproof transport. To do future sampling, just insert a new I-CHEM storm water sampler in the tube. Because a new sample bottle is used each time, no decontamination is needed. The I-CHEM can be securely mounted in a storm water ditch, stream, or storm grate outfall using the storm water sampler mounting kit. Dimensions: Sampler, 13.2"H x 3.8" dia.; Mounting Kit, 15.6"H x 4.6" dia.
Water Cycle Model Activity Set
Using this hands-on model, students can duplicate the processes of the water cycle (evaporation, condensation, and precipitation) in the classroom. The included activity set features ten 8-1/2" x 11" full color study prints to enhance understanding of the water cycle and the various states of water
HOBO® Water Temp Pro v2 Logger
Temperature range: 0°C to 50°C (32°F to 122°F) in non-freezing water and -20°C to 70°C (-4°F to 158°F) in air. Accuracy: ±0.2°C at 0°C to 50°C (±0.36°F at 32°F to 120°F). Resolution: 0.02°C at 25°C (0.04°F at 77°F). Measurement capacity: 21,580 measurements. Sampling interval: user-selectable from 1 second to 9 hours. Memory modes: stop when full or wrap-around when full. Time accuracy: better than ±1 minute per month. Response time in water:
Complete™ Home Water Quality Test Kit
This multi-parameter kit includes tests for levels of the following 13 factors: free chlorine, pH, total alkalinity, total chlorine, total hardness, nitrate nitrogen (as N), nitrite nitrogen (as N), iron, copper, sulfate, chloride, hydrogen sulfide, and bacteria. Simply use the patented test strips to safely and easily analyze the quality of your water. Testing requires no powders, liquids, or tablets. Contains two tests for each parameter and one test for bacteria. Free chlorine: 0, 0.05, 0.2, 0.6, 1.5, 4, 10 ppm (mg/L). pH: 2, 4, 5, 6.5, 8.5, 9.5, 10.5, 12. Total alkalinity: 0, 40, 80, 120, 180, 240, 500 ppm (mg/L). Total chlorine: 0, 0.2, 1, 4, 10 ppm (mg/L). Total hardness: 0, 50, 120, 250, 425, 1,000 ppm (mg/L). Nitrate nitrogen (as N): 0, 2, 10, 20, 50 ppm (mg/L). Nitrite nitrogen (as N): 0, 0.2, 1, 1.5, 3 ppm (mg/L). Iron: 0, 0.05, 0.1, 0.3, 1 ppm (mg/L). Copper: 0, 0.1, 0.5, 1, 2 ppm (mg/L). Sulfate: 0, 250, >500 ppm (mg/L). Chloride: 0, 250, 500 ppm (mg/L). Hydrogen sulfide: presence/absence.
Global Water Composite/Discrete Water Sampler
Sample Size: Composite, 50 ml to 2 liter samples as set by user. Two gallon composite sample maximum. Size: 9˝D X 17˝W X 22˝H. Weight: 20 lbs. Operating Temperature: 0°C to 70°C. Materials: Enclosure, Expanded UV protected by PVC; Bottle, 2 gallon polyethylene; Sample Tubing, Polyethylene. Sample Pump: Flow Rate, 1,000 mL per minute at 4 ft. head; Type, Peristaltic; Maximum Lift, 20'. Logic Timer/Controller: CMOS Solid State (fully potted in epoxy). Sample Hose: One 15' PVC reinforced 1/4˝ ID polyethylene flexible tubing section with intake strainers. Hoses may be extended, as required, using standard 1/4˝ tubing and fittings. Battery: Rechargeable 5 AH Gel Cell. Battery Life: one hour, continuous pumping under load; standby, three months while still retaining enough power to run the pump to capacity.
Water Level Meter with Bottom Detecting Sensor
Two instruments in one - measures static water level and total well depth in a single reading! The shrouded low profile 5/8˝ Teflon probe is fully pressure rated to 2,000 psi and it works properly in cascading water or in wells with severe condensation. Lightweight aluminum reel construction with a steel frame that features a built-in tape guide and well casing hook to protect the tape and unit. The polyethylene tape with stainless steel conductors meets or exceeds US-GGG-T-106E and the European Class II standards. Electronics are conformal coated to protect against water damage. Buzzer alarm has an adjustable volume for operator preference
100' - Water Level Meter with Bottom Detecting Sensor
Global Water Peristaltic Pump
Ideal for removing samples from shallow wells and surface water sources, including lakes, ponds, and holding pools. The water sampler is lightweight, rugged, easy to use, weather resistant, and requires minimal maintenance. Designed to take a manual sample, it also has the ability to backflush the sample hose once a sample has been taken. To provide high sample integrity, the water sample never comes in contact with any water sampler components other than the norprene and polyethylene tubing. The tubing is easy to clean and replace. To avoid cross-contamination or lengthy decontamination procedures, simply change the inexpensive tubing between samples. Includes a 10' power cord that can be attached to a 12V (car battery) power source. Flow Rate: 1000 ml per minute at 4 ft. head. Maximum Lift: 22 ft (6.7 m). Pump Tube: Norprene 1/4" ID. Sample Hose: 15' (4.6 m) nylon reinforced polyethylene tubing with intake strainer. Enclosure: Expanded UV protected PVC. Dimensions: 9" x 7.5" x 4.5". Weight: 6 lbs.
Keck Water Level Meters
Designed to provide reliable and accurate measurements of groundwater levels. Water level readings are taken at the top of the casing with accuracy to within 1/100 of a foot. Extremely durable polypropylene storage reel with rugged solid aluminum frame, highly accurate Polyethylene coated steel tape marked in engineering increments, field serviceable 5/8˝ probe with stainless steel conductors for durability, adjustable sensitivity to prevent false triggering, a built-in reel hanger, and a tape guide for longer tape life. Accuracy: 100th of a foot per 100'. Power: 9-Volt DC alkaline battery. Alarm: Audible and Visual. Warranty: 1 Year from the manufacturer.
Keck 100' water level meter
Aldon Innovating Science™ Environmental Chemistry: Water Treatment and Filtration
Students will develop a knowledge of the processes performed at a water treatment plant and understand the reasons for each process. Changes in the water can be examined after each water treatment step is performed in addition to observing physical characteristics of water, such as clarity, color, odor, and how they are affected from the beginning of the treatment process until the end. Kit includes fine sand, coarse sand, fine gravel, activated charcoal, potassium aluminum sulfate, calcium oxide, kaolin powder, green food coloring, white vinegar, 75 plastic cups, and 15 stirring sticks. Contains enough materials for 15 student groups plus a Teacher's Manual and Student Study Guide copymasters.
200U Sonic Water Level Meter
Measurement Range: Normal 10-500' or Deep up to 1200'. Readout Accuracy: +0.1'. Measurement Accuracy: +0.2% of reading*. Operating Temperature: 30°F to 140°F. Power: 8 AA dry cell batteries. Dimensions: (excluding sonic measuring duct) 7˝L x 4˝H x 5˝W. Sonic Measuring Duct Diameter: 5/8˝. Hole diameter must be at least large enough for 1/2 pipe thread. Sonic Measuring Duct Length: 2˝˝. Weight: 3.5 lbs.
LaMotte® Living In Water Curriculum Tote
Incorporating the study of water, aquatic environments, and the plants and animals that live there, this curriculum tote includes a 395-page Living in Water book; test kit modules for Dissolved Oxygen, Nitrate, and pH (50 tests each); and an armored thermometer. Living in Water includes 50 activities which integrate physical, earth, and life science studies in the classroom. Use the entire curriculum for a comprehensive study or select individual areas of interest. Designed for grades 5 through 8.
eXact® Micro 7+ Water Test Kit
This kit takes the guesswork out of water testing! No visual color matching is required, and the easy-to-use eXact® Strip/Photometer reagent delivery system delivers reagents safely without the need to count drops or crush tablets. The kit includes 25 tests for each of these parameters: Ammonia, Bromine, Calcium Hardness, Copper, Free Chlorine, Total Chlorine, Nitrate, Nitrite, Permanganate, pH, and Total Alkalinity. Each test has a resolution of 0.01 ppm. The included lightweight meter features an automatic test timer, 140 test memory (saves last 20 tests per menu), a simple three-button control, no-slip grip housing, and IP-67 waterproof rating. The kit also includes one mixing cap, one cell cleaning brush, an instruction booklet, and a plastic carrying case. Five-year manufacturer’s warranty.
Steri-Pen System Water Purifier
SteriPEN™ is the only portable water purifier that uses ultraviolet (UV) light to destroy waterborne microbes. With the push of a button, it purifies clear water in seconds by destroying viruses (such as hepatitis and poliovirus), bacteria (Salmonella and E.coli) and protozoa (including Giardia and Cryptosporidium). The ultra-violet lamps purify 8,000 treatments (16 oz. or .5 L). Meets the U.S.E.P.A. Protocol for Microbiological Water Purifiers. Dosage Selector for 2 Volumes: 16 oz. (48 seconds); 32 oz. (90 seconds). Power: 4 “AA“ batteries. Warranty: Limited Lifetime Warranty from the manufacturer.
AMS Shallow Water Bottom Dredge
Ideal for obtaining most types of bottom material! The dredge’s two-way mechanism prevents accidental closure while the dredge is in transit. A spring-loaded release mechanism is triggered once the dredge makes impact with the bottom. Stainless steel screening on the top reduces frontal shock wave and prevents loss of the sample. The 6" x 6" opening provides an effective sampling area of 36 square inches. Jaws, top screen, side plates, underlip plate, screen frame, fasteners, and hinge pin constructed of stainless steel. Exterior weights and closing arms are powder-coated steel.
Global Water Water Level Loggers
Recording rate: linear fixed intervals from 1 per second to every 32,000 seconds (also 0 to 32,000 minutes, hours, and days); logarithmic test (for pump and slug test); event-based (value set by user). Resolution: 12-bit. Accuracy: 0.1% of full scale at constant temperature; 0.2% over temperature range. Range: 25' Model, 0 to 15'; 50' Model, 0 to 30'. Computer interface: RS232, cable provided. Power: internal 9V DC battery, powers logger and sensor for up to three years. Dimensions: Pressure transducer: .812" diameter x 7"L; Data logger enclosure: 1.875" diameter x 12"L.
Logger with 25' Cable, 15' Range
Onset® HOBO Water Level Logger
Specifications: Range - Water Level: 0-30' (0-9m), 0-30 psia (0-207 kPa); Temperature: -4°F to 122°F (-20°C to 50°C). Accuracy - Water Level: ±0.07 ft. (±2.1 cm); Temperature: 0.67°F at 68°F (0.37°C at 20°C). Resolution - Water Level: 0.007 ft. (0.21 cm); Temperature: 0.1°F at 68°F (0.1°C at 20°C).
Global Water Wastewater/Stormwater Sampler
Sample Size: 15 composite sample sizes from 50ml to 2 liters plus a full bottle discrete setting. Size: 9˝L X 17˝W X 22˝H. Weight: 22 lbs. Operating Temperature: 0°C to 70°C. Materials: Enclosure, Expanded UV protected by PVC; Bottles, Polyethylene; Sample Tubing, Polyethylene. Sample Pumps: Flow Rate, 1,000 ml per minute at 4 ft. head; Type, Peristaltic; Maximum Lift, 20'. Logic Timer/Controller: CMOS Solid State (fully potted in epoxy). Sample Hoses: Two 15' PVC reinforced 1/4˝ ID polyethylene flexible tubing sections with intake strainers. Hoses may be extended, as required, using standard 1/4˝ tubing and fittings. Battery: Rechargeable 5 AH Gel Cell. Battery Life: One pump running, 1 hour; two pumps running, 1/2 hour; standby, 3 months while still retaining enough power to run the pump to capacity.
Aquatic Weed Eradicator
The 28" serrated cutting blade is reinforced ensuring the blades won't bend under a heavy load of weeds. To use, simply skim the eradicator across the water, let it sink, retrieve it in a short push-pull action, and drop the weeds off. 11' Powder-coated aluminum handle comes in two pieces
36" Lake Rake
Use to skim floating aquatic vegetation and algae from the water with the included float attachment. The float can also be removed for submerged aquatic weeds. This 36" wide aluminum rake comes with a 2-piece, 11' rust-proof powder-coated aluminum handle, detachable polyethylene float and 20' of rope. Shorten the handle and remove the float for use as a professional-grade landscaping rake.
General Oceanics Mechanical Flowmeter
Use in rivers, estuaries, canals, sewer outfalls, pipes, and harbor entrances to determine velocity and distance information or use with plankton nets to determine water volume associated with each tow. Both models incorporate precision molded rotors coupled directly to six digit counters which record each rotor revolution. Supplied with a standard calibration curve (number of counts/unit time vs. velocity) sealed inside transparent body. A single pin and lanyard system located ahead of the lateral center of mass allows the flowmeter to maintain correct dynamic alignment with the fluid flow in which it is immersed. Materials: Celcon rotor, nickel-plated brass nose piece, poly-carbonate body, stainless steel main rotor and idler gear shafts, Delrin idler gears, and Delrin and nylon digit wheels. Dimensions: Overall length is 8-3/8" with a 1-9/16" dia. body. Depth Rating: Unlimited (free flooding). Data Readout: Six 10-digit counter wheels read 000,000 to 999,999; 10 counts per rotor revolution, non-resetting; read by noting difference in start and
HawkEye® Portable Fish Finder
Ideal for bottom contouring and mapping of lakes, rivers and creeks! Easy to use, simply turn it on and toss the floating transducer into the water, then view the screen for instant bottom structure and depth readings. Takes bottom structure, depth and fish readings from 3' to 120'. Other features include ShootThru technology which reads through boat hulls and ice, a battery saver mode, auto power off, a soft glow backlit display, 180° pivoting VirtuView LCD Icon Display, and a water resistant splashproof design. Unit includes a removable belt clip, storage bag, adjustable neck strap and a floating sensor with 35' of cable. Power: 4 AA Batteries for up to 20 hours battery life. Dimensions: 1.5" x 2.8" x 4.3". Display Size: 1.5" x 1.8". Sonar Frequency: 200 KHZ. Sonar Angle: 20°. Backed by a 2-Year Warranty from the manufacturer.
HawkEye® Handheld Digital Depth Sounder
Provides instant depth readings from 2.5' to 199' in 10ths and with the flip of a switch, also gives you real time temperature (water or air) and fish readings. The algorithmic programming reduces false readings. Other features include English and metric readings, instant depth readings, an auto mode which allows remote viewing of readings, a manual mode for one touch readings, ShootThru technology for readings through ice or boat hulls, a soft glow backlit LCD display, waterproof to 50' (15m), plus it is impact-resistant and it floats. Power: one 9V battery for up to 10 hours continuous use. Dimensions: 7"H x 2"W x 2"D. Display Size: .93"W x .63"H. Sonar Frequency: 200 KHZ. Sonar Angle: 20°. Waterproof Limit: 50' (15m). Operating Temperature: 14°F to 122°F (-10°C to 50°C).
Wildco® Hess Stream Bottom Sampler
Effectively samples gravel and cobble stream bottoms. Stainless steel cylinder with two large windows and a pair of strong handles forcibly pushes cylinder into gravel or cobble stream bottoms. Penetration depth is adjustable. Water flows in through upstream window of sampler, out through downstream window, and into collecting net and bucket. Forward window of sampler is covered with 1000 µ mesh, nylon Nitex® bolting cloth. Cylinder is 13" I.D. x 16" H with an area of 133 square inches.
LaMotte Sounding Weight & Calibrated Line
Marked 0 to 20m in 1m increments, this heavy nylon line can be used with secchi discs to determine turbidity of water or with the accompanying 2 lb. zinc sounding weight to test overall depths of ponds, lakes, rivers, etc. Line features a spring clip for quick attachments and is wound on a foam spool which doubles as a flotation device to prevent accidental loss of line if dropped overboard.
Wildco Periphyton Sampler
Artificial substrate sampling device floats inconspicuously in water and exposes eight standard microscope slides to water for sampling. Developed to EPA requirements, sampler has polyurethane closed cell floats, three anchorage points for above or below water attachment, stainless steel frame, and cellulose acetate butyrate tray that holds 16 standard 1" x 3" microscope slides (included). Slides may be removed for examination. Self-righting. 14-3/4"L, 7-3/4"W, 6-1/2"H.
Integrating Sediment Sampler
Small, lightweight, cast aluminum sampler is designed to obtain sediment samples in shallow water with a wading rod. An exhaust tube is cast into the body of depth integrating-type sampler and allows air in one-pint sampler bottle to escape down stream as it is displaced by the accumulating sample. Includes two 1/4" sampler nozzles, one 1' wading rod with handle, a case of 24 one-pint sample bottles with caps, and adhesive labels. Dimensions (with nozzle and rod): 12" x 23".
Developed for use under various challenging field conditions. Its different impellers measure almost any fluid, liquid or gaseous medium. Fluid measurements can be taken in knots, km/h, mph, and m/s. The meter also takes temperature measurements in either °F or °C, including minimum and maximum temperature and current temperature. Also included is a wind speed impeller which allows you to take air velocity and wind chill measurements. To take flow measurements from a bridge or other elevated location, use the optional flow sensor with 15 meter cable (sold separately). Kit includes the display, 2m telescoping rod, a 60mm water impeller, 25mm air impeller and carrying case. Weatherproof. Specifications: Accuracy: ±2% fluid speed; ±3% air velocity; Temperature, ±1°F (±0.2°C). Range: Fluid Speed, 0.2 to 40 mph (0.1 to 18 M/Sec) depending on impeller; Temperature, -58°F to 212°F (-50°C to 100°C). Resolution: 0.3 km/h; 0.2 mph; 0.2 knots; 0.1 M/Sec. Temperature Modes: Minimum, maximum, current temperature, wind chill factor.
Fieldmaster Student Secchi Disc
Ideal for use in laboratory assignments dealing with water clarity. Perfect for any type of water, this 20 cm dia. limnological disc is constructed of heavy-duty ABS plastic with black and white quadrants on one side and solid white on the other. Includes built-in 1 lb. sounding weight, 20m nylon line, and instructions.
GREEN Program Estuary Monitoring Kit
This kit was specifically designed for testing salt and brackish waters for coliform bacteria, salinity, dissolved oxygen, BOD, nitrate, pH, phosphate, temperature, and turbidity. Kit comes complete with all TesTab® reagents and components to test ten water samples (Three for coliform). Lesson plans included. Designed for up to 30 students, grades 1 through 5.
MJP Student Stream Flowmeter
Revolutions of impeller are sensed electronically and transmitted to a hand-held counter unit that features start, stop, and clear functions. Revolutions per unit of time can be translated into stream velocity using a conversion chart. May be used in brackish water or salt water. Fitted with a re-settable LCD counter, this flowmeter eliminates the need for tiresome calculations. Comes complete with PVC pole mounted with an impeller which collapses into four sections for easy storage and carrying, three stream bed elevation rods, protective carrying pouch for counter, weather-proof storage case, instruction manual, and comparison charts. Optional 3-cup, hand-held anemometer is available for use with the flowmeter for measuring air velocity. Range of the anemometer is 2 mph to 65 mph. Materials: PVC impeller poles, stainless steel impeller shaft, plastic impeller. Dimensions: Overall pole length: 3.3'. Four individual sections: 9.8" each. Cable: 3.3'. Elevation rods: 9.8", 4.9", and 2.5". Data Readout: LCD counter; 800 counts per
Well Watch 1100
Measurement: Range, 9 to 2,000 feet; Resolution, 0.05 ft. Accuracy, 0.1 ft. Logging: Memory, nonvolatile flash memory for 14976 data points in addition to calibration and user data. Logging rates, 1 sec to 60 minutes per sample. Environmental: Temperature, 0°F to 110°F. Humidity, 10 to 90% non-condensing. Display: 2 x 16 character LCD. Alarms: high and low 10 to 2,000 ft. Serial Output: baud 300 – 57600, 8 data bits, one stop bit. (19200 baud default). Power: External Power, 7 to 12VDC at 50ma. Real time clock, Li Ion 3V battery CR2032. Dimensions: 4˝ x 5˝ x 2.5˝. Control Unit Weight: 10.5 oz. Probe Weight: 5.5 oz.
Well Sounder 2010
Measurement: Range, 9 to 2,000 feet; Resolution, 0.05 ft. Accuracy - 0.1 ft. Logging: Memory, nonvolatile flash memory for 14000 data points in addition to calibration and user data. Logging rates, 1 sec to 60 minutes per sample. Environmental: Temperature, 0°F to 110°F. Humidity, 10 to 90% non-condensing. Display: 2 x 16 character LCD. Alarms: high and low 10 to 2,000 ft. Serial Output: baud 300 – 57600, 8 data bits, one stop bit. (19200 baud default). Power: External Power, 6.5 to 12VDC at 50ma. Internal Power, 6 AA alkaline batteries provide continuous use for approx. 80 hours or up to 21 days in power save mode. Real time clock, Li Ion 3V battery CR2032. Dimensions: 4˝ x 7.5˝ x 1.25˝. Control Unit Weight: 14 oz. with batteries. Probe Weight: 5.5 oz.
AMS Multi Stage Sediment Sampler
Uses a disposable plastic core catcher that fits on the end of a 2" x 12" plastic liner. The technically enhanced core tip is specifically designed allowing the plastic core catcher and liner to fit snugly over the core tip's machined lip which holds the liner and core catcher in place during sampling, reducing side-to-side float. Once the core catcher and liner are placed on the core tip, they are loaded into a standard multi-stage base section and screwed together. The Flap Check Cap is a modified multi-stage cap with 4 holes machined completely through it and a rubber check flap stretched and fitted over the holes. During deployment of the sampler, the flap cap opens and allows excess air and water to escape through the top of the sampler. The sediment enters and fills the liner. When the sampler is lifted, the rubber flap cap closes over these holes and creates suction to assist the core catcher in retaining the sample. Optional 12" sections are available and can be added to the sampler to extend its length for profile studies up to 48",
Porcupine Fish Attractor
Improves spawning habitat while providing valuable structure for all species of fish in all size lakes. From farm ponds to big reservoirs, these fish attractors help enhance quantity and quality of fish. Fish relate to it quickly as algae and plankton form to attract baitfish, luring larger fish to its locale. Also provides refuge and shade to young fish, increasing survival rates. Easily assembled and installed. Environmentally friendly. Available in three sizes: a 2-1/2´ diameter model for use in 4´ of water, a 4´ diameter model for 6´ of water and deeper, and a 5-1/2´ diameter model for water 10´ and deeper.
2-1/2” Porcupine Fish Attractor
Fish Hawk TD
Thanks to highly accurate temperature and water pressure sensors, the Fish Hawk TD provides an accurate water temperature profile of the entire water column by showing the water temperature at every 5-feet of depth down to 300-feet. The Fish Hawk TD also reveals the true running depth of copper, leadcore, and dipsey lines. Operating Depth Range: 0-300 feet. Maximum Depth: 400 feet. Operating Temperature Range: 32°F to 102°F. Unit of Measure: English or metric. Internal Lithium Battery: 20-year shelf life. Saltwater approved.
Wildco Fish Measuring Board
For making fast and accurate fish measurements in the field or laboratory. Measuring board is acrylic plastic and features a brass bar assembly and three easy-to-read scales. Scale No. 1: 0 to 30 inches (1/8" per division). Scale No. 2: 0 to 30 inches (.1" per division). Scale No. 3: 0 to 75 cm (1 mm per division).
The Ultimate Fish Board
"Durable, high density polyethylene fish measuring board provides fast, accurate fish measurements. Its smooth surface and easy-to-read scales allow for minimal trauma to the fish. Tempered aluminum straight edge is set up for metric measurements, but can easily be turned around for English measurements using rustproof fasteners. A tapered backstop helps prevent specimen from sliding off during measurement. Available in 30""/75 cm and 24""/60 cm sizes with English and metric measurements. English scale has 1/8˝, 1/16˝, and 1/32˝ divisions. Metric scale has 1 mm divisions. Dimensions: 30""/75 cm; 9"" x 30"" x 1-1/4"". 24""/60 cm; 9"" x 24"" x 1-1/4"".
30""/75 cm "
Baitwell Food Fish Dip Net
With its unique Monorail construction, double-walled 42" aluminum handle, and tangleless coated nylon, this 22" deep net offers excellent strength and maximum flexibility. The 1/2" square, knotless nylon net is encased within the 17" x 21" bow, protecting the net from bait tanks, sand, and rocks.
Features include a Monorail aluminum handle and a 12" deep, 3/16" mesh nylon net. Nylon net is completely encased within the 16" x 16" bow, eliminating abuse from rocks, sand, and bait tanks. Two handle lengths available.
Baitwell Net with 4' Handle
WaterMark® Fish Data Ruler
Made of durable Styrene, this ruler can be written on with a pencil and then erased. Graduated in inches/tenths of inches and centimeters on both sides. Dimensions: 4.2˝W x 39˝L.
Humminbird 788ci GPS/Sonar Combo
This professional grade GPS/Sonar Combo has a high-definition 5˝ TFT color LCD with vivid 640V x 640H resolution for brilliant clarity, even in direct sunlight. The DualBeam PLUS™ sonar combines two selectable, fish- and structure-tracking beams for precision viewing at many depths. The narrow 20° beam provides excellent bottom detail and spots fish hidden in clutter while the wide-angle 60° beam scouts a large area for surveying fish in many directions and picking up large schools of fast-moving baitfish. A front-mounted internal GPS system allows for permanent in-dash mounting or use with the versatile quick-disconnect mount. Mark fishing hot spots, landmarks, routes and waypoints with this 16- channel WAAS-enabled receiver and view results on the sonar display. In addition, it includes dual card slots for maps and saving waypoints, as well as 3 programmable preset buttons to save your favorite views. Specifications: Display: 5.0˝ Diagonal, 640V x 640H, 256-Color TFT. Memory: Waypoints, 3,000; Routes, 50; Tracks, 50 with
Humminbird 998c SI Sonar/GPS Combo
Built around an 8˝ color TFT display with 480V x 800H resolution, the 998c SI uses Humminbird's exclusive High-Definition Side Imaging Sonar to view amazingly clear, picture-like images of fish, the bottom and structure. It’s the ultimate structure-finding tool, and with its massive coverage (480 feet from side to side!) you can scan in mere minutes what used to take hours. With the ultra-wide display, you can easily view Side Imaging and the built-in, down-looking DualBeam Plus sonar or other screens simultaneously. Record and playback sonar readings, and even make sensitivity and other adjustments to the recording. Also comes with a 16-channel GPS/WAAS receiver. Display – 8˝ Diagonal 480V x 800H 16:9 Color TFT. Memory – Waypoints: 3,000. Routes: 50. Tracks: 50 w/20,000 points each. Sonar – DualBeam PLUS: 200 kHz / 20˚ @ -10db; 83 kHz / 60˚ @ -10db. Depth: 1500 ft. HD Side Imaging: 455 kHz / (2) 86˚ @ -10db; 800 kHz / (2) 55˚ @ -10db. Depth: 150 ft. 180˚ total coverage. Power Output – 1000 Watts (RMS); 8000 Watts (Peak-to-Peak). GPS Features – 16
Model 39 Professional Pocket Altimeter/Barometers
German engineered professional pocket-sized altimeter/barometer features a durable aluminum housing with a clear acrylic, scratch-resistant face. Other features include 16-jeweled, temperature compensated precision movement and aneroid capsule. Available in English or metric. Includes lanyard and leather case. Dimensions: 2-1/2" x 7/8". Stock Altitude Maximum Altimeter Barometer Number Model Range Graduation Range 43351 39FT 18,000 ft. 30 ft. 27"-33" Hg 43336 39M 6,000m 10m 970 - 1,050hPa
Yukon® Advanced Optics Sea Wolf 3x42 Waterproof Night Vision Monocular
This waterproof monocular uses Generation 1 technology to amplify visible light several thousand times and features a maximum detection range of 500 meters. The built-in PULSE infrared illuminator increases the viewing range and enables you to use the unit in low to no light conditions. The PULSE system uses a pulsing frequency invisible to the human eye to provide a high level of infrared illumination while minimizing battery usage. Fully multicoated optics decrease glare and improve light transmission to enhance viewing. Carrying case included. Power: 3V Lithium CR123A battery (not included).
Portable Salinity and Brix Refractometers
Salinity Refractometer (Salt) This dual scale salt refractometer may be used to determine either the parts per thousand of salt dissolved in water or the specific gravity of salt water. It’s the affordable way to accurately monitor salt content in fisheries, nursery irrigation systems, sea water, etc. Temperature compensated from 10°C to 30°C. Range: 0 to 100 ppt; 1.000 to 1.070 specific gravity. Resolution: 1 ppt; 0.001 specific gravity. Accuracy: ±1 ppt; ±0.001 specific gravity. Dimensions: 7-3/4"L x 1-1/2" dia. Untuk alat-alat perikanan seperti alat selam, alat pakan ikan, alat pembenihan, alat budidaya, alat tangkap, alat pengolah, alat lab air, alat lab kelautan, alat sekolah perikanan, alat politeknik perikanan, alat jurusan perikanan & kelautan, paddle whell, current meter, DO meter, pencetak pellet, mesin es, obat ikan dan alat perikanan lainnya dapat menghubungi kami melalui email:
Hp : 081387587112
Fax : 0251-7543281
Untuk alat-alat perikanan seperti alat selam, alat pakan ikan, alat pembenihan, alat budidaya, alat tangkap, alat pengolah, alat lab air, alat lab kelautan, alat sekolah perikanan, alat politeknik perikanan, alat jurusan perikanan & kelautan, paddle whell, current meter, DO meter, pencetak pellet, mesin es, obat ikan dan alat perikanan lainnya dapat menghubungi kami melalui email: